Auctions Electrical and Electronic Equipment Update

CURRENT BID: $100.0 STATE: NC NO. OF BIDDERS: 0 CLOSE TIME: Fri, 10 Apr 2026 17:24:00 CST

Overview

(1) Onan 115916 generator. The generator is classified in repairable condition. The unit was ran and exercised regularly until 2019, when the battery was disconnected.

Specifications

• Make: Onan
• Model: 115916
• Serial Number: 0760152003

Condition & Markings

• Parts may be missing, and repairs may be required.
• The generator was regularly operated until 2019.
• The battery has been disconnected since 2019.
• Bar tag number 21170 is present.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Screening hours are Monday through Friday, 0830-1500, closed federal holidays.
• The successful bidder must provide the means and transportation to remove the generator.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $100.0 STATE: NC NO. OF BIDDERS: 0 CLOSE TIME: Fri, 10 Apr 2026 17:14:00 CST

Overview

(1) ONAN 115916 generator. The generator is classified in repairable condition. The unit does not run.

Specifications

• Make: ONAN
• Model: 115916
• Serial Number: 6760152004
• Dimensions: 40 inches width, 70 inches depth, 90 inches height

Condition & Markings

• Parts may be missing, and repairs may be required.
• The generator does not run.
• Bar tag 21169 is present.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• It is the responsibility of the person or agency who is awarded the generator to provide the means necessary to remove the generator.
• Screening hours are Monday through Friday 0830-1500, closed federal holidays.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>

CURRENT BID: $100.0 STATE: MT NO. OF BIDDERS: 0 CLOSE TIME: Fri, 10 Apr 2026 16:48:00 CST

Overview

This lot contains (1) OLSUN OH220 Dry Transformer. The transformer is classified in used condition.

Specifications

• Make: OLSUN
• Model: OH220
• Power Rating: 150/203 KVA
• Frequency: 480/60HZ
• Current Rating: 192-192-65A
• Part Number: 29265AD

Condition & Markings

• This lot is in used condition. Parts may be missing, and repairs may be required.
• Working condition is not guaranteed.

Inspection and Removal

• Inspection and Removal: Available Monday through Thursday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Pickup is available by appointment only Monday through Thursday from 7AM to 3PM.
• The purchaser is responsible for loading, removal, and shipping.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

Item Control Number :140300-6071-0006

]]>

CURRENT BID: 100.0 STATE: MT NO. OF BIDDERS: 1 CLOSE TIME: Fri, 10 Apr 2026 16:38:00 CST

Overview

This lot contains (1) OLSUN OH220 Dry Transformer. The transformer is classified in used condition. The unit shows some dents and dings as visible in the provided images.

Specifications

• Make: OLSUN
• Model: OH220
• Power Rating: 150/203 KVA
• Frequency: 480/60HZ
• Current Rating: 192-192-65A
• Part Number: 29265AD

Condition & Markings

• This lot is in used condition. Parts may be missing, and repairs may be required.
• The transformer shows some dents and dings on the exterior surfaces.
• Working condition is not guaranteed.

Inspection and Removal

• Inspection and Removal: Available Monday through Thursday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Pickup is available by appointment only Monday through Thursday from 7AM to 3PM.
• The purchaser is responsible for loading, removal, and shipping.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

Item Control Number :140300-6071-0005

]]>

CURRENT BID: $10.0 STATE: CO NO. OF BIDDERS: 0 CLOSE TIME: Fri, 10 Apr 2026 16:13:00 CST

Overview

This lot contains (1) ABEM WADI VLF Receiver Electronic Measuring Instrument. The instrument is classified in scrap condition. The unit is untested and includes the main unit housed in a black soft carrying case, an orange control/display unit with connected coiled cabling, and an associated battery pack/interface unit.

Specifications

• Make: ABEM INSTRUMENT
• Dimensions: Approximately 10″ x 8″ x 4″
• Weight: Approximately 5-10 lbs

Key Features

• VLF (Very Low Frequency) receiver designed for geophysical surveying.
• Measures distortions in global VLF navigation signals to detect subsurface conductivity changes.
• Used for mapping water-bearing fracture zones and mineralized veins.
• Includes display and interface components with coiled cabling connection.

Condition & Markings

• This lot is in scrap condition. Parts are missing, and repairs are required.
• The unit is untested and sold strictly as-is for parts, repair, or restoration purposes.
• No warranty is implied or expressed.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Buyer is responsible for removal of property, shipping and handling costs. Must call to schedule removal and/or inspection of property, by appointment only.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

Item Control Number :1482M1-6057-0002

]]>

CURRENT BID: 10.0 STATE: CO NO. OF BIDDERS: 1 CLOSE TIME: Fri, 10 Apr 2026 16:03:00 CST

Overview

This lot contains (1) Cirrus 110A doseBadge Personal Noise Dosimeter from October 2007. The device is classified in unused condition. This is a small, wearable device designed to measure and record noise exposure over time for occupational monitoring and workplace safety compliance.

Specifications

• Make: Cirrus
• Model: 110A
• Equipment: Personal Noise Dosimeter
• Battery Type: Internal rechargeable NiMH
• Weight: 51 g (1.8 oz)
• Data Storage: Up to 24 hours of logged noise data
• Battery Life: 12-30 hours depending on configuration

Key Features

• Wireless and self-contained design with no cables, displays, or external controls required.
• Dual-channel measurement capability for simultaneous recording of two different settings.
• Measures LAeq (equivalent continuous sound level), LCpeak (peak weighted C), % Dose, LAVG, TWA and exposure history over time.
• Rugged metal case construction for industrial environments.
• Meets international standards including IEC 61252 and ANSI S1.25.
• Includes carrying case, documentation, user manual, and calibration documents.

Condition & Markings

• This lot is in unused condition. Parts may be missing, and repairs may be required.
• Device is dated from October 2007.
• Working condition is unknown.
• Sold as is with no warranty implied or expressed.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Buyer is responsible for removal of property, shipping and handling costs.
• Must call to schedule removal and/or inspection of property, by appointment only.

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

Item Control Number :1482M1-6036-0001

]]>