GSA Auctions Electrical and Electronic Equipment Update

CURRENT BID: $1000.0 STATE: OH NO. OF BIDDERS: 0 CLOSE TIME: Thu, 30 Apr 2026 15:00:00 CST

One lot consists of Building “Materials”;

• 2 in IPS to 3/4 in After set Adapter: 202 EA
• 45 kVA Dry Type Transformer: 1 EA
• 500 Series Steel Raceway Component: 204 EA
• 525 Series Grommet Service Fitting: 45 EA
• 525 Series Service Fitting Housing: 102 EA
• Addressable Input Module IDNet: 12 EA
• Addressable LED Pull Station: 6 EA
• After set Insert Extension (1 in High): 404 EA
• AL5200 Coupling Fitting: 15 EA
• AL5200 Double-Duplex Cover Plate: 35 EA
• AL5200 Duplex Cover Plate: 5 EA
• AL5200 Raceway Cover Plate (Brushed): 12 EA
• AL5200 Series Component (Unlisted): 35 EA
• AL5200 Series Raceway Base: 120 EA
• AL5200 Series Raceway Component: 24 EA
• AL5200 Series Raceway Cover: 80 EA
• AL5200 Wire Retainer: 50 EA
• Ceiling LED Speaker Strobe White: 299 EA
• Control Interface Module: 2 EA
• Dimming Control Module: 3 EA
• Locking Nipple (1-1/4 in IPS, 1-1/2 in Length): 202 EA
• Panelboard Cabinet Box: 1 EA
• Panelboard Interior Assembly: 5 EA
• Photoelectric Smoke Detector: 4 EA
• QS Sensor Module: 58 EA
• Remote Fire Alarm Phone Jack: 4 EA
• Round After set Insert: 202 EA
• see Touch QS Wall station: 23 EA
• Smoke Detector Sensor Base: 4 EA
• Switching Control Module: 5 EA
• Type A17 – 4″ LED Trim (Widespread): 252 EA
• Type A17 – 4 in LED Downlight: 252 EA
• Type A17 – Adjustable Bar Hanger Set: 252 EA
• Type A17 – LED Downlight Module: 252 EA
• Type A17A – Adjustable Bar Hanger Set: 16 EA
• Type A17A – LED Downlight Module: 16 EA
• Type A17B – 4 in LED Downlight: 6 EA
• Type A17B – Adjustable Bar Hanger Set: 68 EA
• Type A17B – LED Downlight Module: 68 EA
• Type A18 – LED Downlight Module: 4 EA
• Type A19 – 4 in Downlight Trim: 12 EA
• Type A19 – 4 in LED Downlight Housing: 12 EA
• Type A19 – 4 in LED Downlight Module: 12 EA
• Type A19 – Downlight Bar Hanger Set: 12 EA
• Type A9 – Recessed Slot Linear LED: 3 EA
• Type B2 – 4 ft Surface LED: 34 EA
• Type B2 – Linear LED Light Fixture: 35 EA
• Type D17 – 2′ Under-Cabinet LED Fixture: 38 EA
• Type D5 – LED Driver: 98 EA
• Type D5 – LED Recessed Downlight: 195 EA
  Type D5 – Recessed Downlight Tool: 1 EA
  Weather Shield Panel Cover: 1 EA

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.

Disclaimer

• The condition of the property is not warranted. All quantities provided are estimates. Parts may be missing, and repairs may be required.

]]>

CURRENT BID: 25.0 STATE: LA NO. OF BIDDERS: 1 CLOSE TIME: Thu, 30 Apr 2026 14:04:00 CST

This lot contains (1) Deutz D5746 7 KW trailer mounted generator. (1243N7-6069-LA06).

Specification

• Make: Deutz
• Year: 1952
• Model: D5746
• Serial Number: 54190
• Power Output: 7 KW
• Fuel Type: Diesel
• Length: 133″
• Width: 65″
• Height: 76″

Key Features

• Trailer mounted configuration for portability.
• Equipped with 2 inch coupler for towing.

Condition & Markings

• This lot is in repairable condition. Parts may be missing, and repairs may be required.
• The generator is inoperable and does not run.
• Unknown deficiencies exist and require assessment.
• No technician is available to validate equipment deficiencies or repairs required.

Inspection and Removal

• Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
• Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
• Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
• Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
• Physical screening is always recommended prior to requesting/bidding.
• Buyer/Requestor has 10 days to remove property.
• Recipient is responsible for all aspects associated with property’s removal.
• Letter of authorization to remove property is required for third party pickups.
• For more information or appointments, Brian Thacker, 318-487-5867, bthacker@ldaf.state.la.us

Disclaimer

• The condition of the property is not warranted. Pictures are not warranted.

]]>