CURRENT BID: $10.0 STATE: TX NO. OF BIDDERS: 0 CLOSE TIME: Wed, 15 Apr 2026 19:32:00 CST
Overview
This lot contains (1) Fluke FLK-199C/AN Oscilloscope. The item is classified in used condition. The Fluke 199C Scopemeter is a handheld oscilloscope/multimeter combo with 200 MHz bandwidth and dual-channel waveform analysis.
Specifications
- Make: Fluke Corporation
- Model: FLK-199C/AN
Key Features
- Handheld oscilloscope/multimeter combo design.
- 200 MHz bandwidth capability.
- Dual-channel waveform analysis functionality.
Condition & Markings
- Usable/good condition.
(693HAE60554001)
]]>
CURRENT BID: $10.0 STATE: TX NO. OF BIDDERS: 0 CLOSE TIME: Wed, 15 Apr 2026 19:22:00 CST
Overview
This lot contains (1) Fluke FLK-199C/AN Oscilloscope. The item is classified in used condition. The Fluke 199C Scopemeter is a handheld oscilloscope/multimeter combo with 200 MHz bandwidth and dual-channel waveform analysis.
Specifications
- Make: Fluke Corporation
- Model: FLK-199C/AN
Key Features
- Handheld oscilloscope and multimeter combination device.
- 200 MHz bandwidth capability.
- Dual-channel waveform analysis functionality.
Condition & Markings
- Usable/good condition.
(693HAE60553001)
]]>
CURRENT BID: $10.0 STATE: TX NO. OF BIDDERS: 0 CLOSE TIME: Wed, 15 Apr 2026 19:12:00 CST
Overview
This lot contains (1) Fluke FLK-199C/AN Oscilloscope. The item is classified in used condition. The Fluke 199C Scopemeter is a handheld oscilloscope/multimeter combo with 200 MHz bandwidth and dual-channel waveform analysis.
Specifications
- Make: Fluke Corporation
- Model: FLK-199C/AN
Key Features
- 200 MHz bandwidth capability.
- Dual-channel waveform analysis functionality.
- Handheld oscilloscope and multimeter combination design.
Condition & Markings
- Usable/good condition.
(693HAE60552001)
]]>
CURRENT BID: $10.0 STATE: MT NO. OF BIDDERS: 0 CLOSE TIME: Wed, 15 Apr 2026 12:16:00 CST
Fluke Corporation Model 337 Ammeter. (6905E760433001) repairable
Specifications
- Make: Fluke Corporation
- Model: 337
- Serial Number: 9155196
Key Features
- Digital clamp meter with LCD display.
- Rotary selector switch for measurement functions.
- Hinged clamp jaw design for current measurement.
- Multiple measurement function buttons on front panel.
Condition & Markings
- Handwritten markings “BAD” visible on yellow tape attached to the device.
- Surface wear and scuffing visible on the yellow plastic casing.
- Device requires repair.
- Item is stored at a secure facility with no on-site viewing available.
Inspection and Removal
- Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
- Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
- Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
- Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
- No on-site viewing is available as the item is stored at a secure facility. For information contact Rosa Henderson at (406) 896-3241.
]]>
CURRENT BID: $10.0 STATE: MT NO. OF BIDDERS: 0 CLOSE TIME: Wed, 15 Apr 2026 12:06:00 CST
Alber Corp CRT-400 Battery Test Set. (6905E760432001) repairable
Specifications
- Make: Alber Corp
- Model: CRT-400
- Serial Number: CR-056-10-2015
Key Features
- Digital display screen for test readings and measurements.
- Multiple control buttons and navigation interface for operation.
- Portable handheld design with carrying strap.
- Battery compartment for power source.
Inspection and Removal
- Inspection and Removal: Available Monday through Friday, by confirmed appointment only. The site is closed on federal holidays. Contact the property custodian (listed below) to schedule an appointment.
- Property Inspection: Bidders are strongly encouraged to inspect the property prior to placing a bid to evaluate its condition and suitability. By bidding without an inspection, bidders assume the risk of potential omissions in the description.
- Removal Responsibilities: The successful bidder is solely responsible for all aspects of removal, including packing, crating, banding, loading, and shipping. The agency will not provide assistance.
- Authorized Third-Party Removal: The authorized third-party agent must present a Letter of Authorization from the high bidder (see terms and conditions for details), a copy of the purchaser’s receipt, and a valid photo ID at the time of removal.
- Contact Rosa Henderson at (406) 896-3241 for additional information or for removal.
- Item is stored at a secure facility and appointment is required for removal.
]]>